Wall & Ceiling Mounted BLE Devices

High-res thermal imaging counts occupants with seat-level accuracy while preserving personal anonymity. 200-sq ft. coverage at 10-ft. ceiling height.

A suite of sensors deliver a complete overview of the room’s environment: temperature, humidity, light, air quality, air pressure, and motion.

6 minutes to install, start to finish.

Built-in IR transmitter sends room ID for precise location of people and things.

Use DC, PoE, or the long-lasting 4-year battery included.

Works with your existing Wi-Fi network, Cisco, Wi-Fi 6, Kontakt.io, and other BLE gateways.

Easily push firmware over the air and monitor device health.

Streamlined for affordability and installation at scale.

6 minutes to install, start to finish.

Built-in IR transmitter sends room ID for precise location of people and things.

Works with your existing Wi-Fi network, Cisco, Wi-Fi 6, Kontakt.io, and other BLE gateways.

Easily push firmware over the air and monitor device health.

The Anchor Beacon 2 is the market leader, helping keep pace with busy visitors at the Qatar World Cup, JFk, LAX, and 170 other airports around the world.

Powered by two mighty ER14250 lithium manganese dioxide batteries for 8+ years years of indoor service.

No need to detach the unit. Cover pops off, batteries pop in.

Works with your existing Wi-Fi network, Cisco, Wi-Fi 6, Kontakt.io, and other BLE gateways.

Easily push firmware over the air and monitor device health.

Attaches to any soap or sanitizer dispenser in your facility (pump and automatic), so you can deploy without a rip-and-replace.

The universal dispenser includes a buzzer to remind clinicians to sanitize before coming in contact with patients.

Kontakt.io’s proprietary model identifies and logs hygiene events in real time, providing accurate, continuous compliance; no more manual monitoring or human biases.

The solution automatically detects non-functioning or empty dispensers and flags them for repair and filling.

With a 5,000 mAh lithium cell and over-the-air firmware updates, the beacon runs for years without hands-on servicing, keeping IT overhead low and uptime high.

Assess module status or notice key events (like a dispense, refill, or error) with a quick glance at the LED.

Designed to interface with GOJO Purell ES10 dispensers from the ground up, this beacon uses an infrared SmartLink interface to communicate natively with the dispenser and capture hand hygiene events.

The beacon detects and logs dispense events in real time, providing accurate, continuous compliance data without human observers, manual audits, or the Hawthorne effect.

Integrated buzzers deliver local hand prompts when a hand hygiene opportunity is detected, nudging staff to sanitize before patient contact begins.

Powered by four standard ER14505 cells, the beacon runs for four years between service cycles; depleted batteries can be easily replaced.

Over-the-air framework and configuration updates are pushed remotely, so that devices are always on the latest versions, and require zero work from your IT team.

BLE connected and cloud managed for real-time soap level monitoring, so you never run out. Improves planned maintenance and remotely monitors devices.

Reads individual badges to help ensure hand hygiene protocols compliance.

Automatically reminds staff in the room to wash hands before consultations.

Plug-and-play module with Gojo/Purell ES8 dispensers.

Three years of maintenance-free service.